Ersatzteile, Zubehör & Reparatur Tel.: 0049 98 72 / 95 66 61 0
Ersatzteile, Zubehör & Reparatur Tel.: 0049 98 72 / 95 66 61 0

PROMAC PBD-2555V Metalldrehmaschine

Bilddaten:

PBD-2555V.jpg
JPG-Datei [61.5 KB]
PBD-2555V_mid.tif
Tagged Image File [94.8 MB]
PROMAC PBD-2555V .jpg
JPG-Datei [810.0 KB]

Bilddaten:

PBD-2555V_Figure 5-1.jpg
JPG-Datei [63.5 KB]
PBD-2555V_Figure 5-2.jpg
JPG-Datei [60.9 KB]
PBD-2555V_Figure 5-3.jpg
JPG-Datei [29.6 KB]
PBD-2555V_Figure 8-1.jpg
JPG-Datei [4.3 KB]
PBD-2555V_Figure 8-2.jpg
JPG-Datei [47.5 KB]
PBD-2555V_Figure 9-1.jpg
JPG-Datei [49.4 KB]
PBD-2555V_Figure 10-6.jpg
JPG-Datei [44.7 KB]
PBD-2555V_Figure 10-7.jpg
JPG-Datei [15.0 KB]

- Stufenlose elektronische Drehzahlregulierung
- Grauguss-Maschinenbett für schwingungsfreies Arbeiten
- Spindel Rechts-/Linkslauf ermöglicht Gewindeschneiden
- Integriertes Kühlmittelsystem
- Integrierte Maschinenleuchte
- Inkl. Maschinensockel

 

 

 

 

 

 

 

 

 

A ............................................ Machine cabinet stand
B .................................................................. Gear box
C ..............................................................Pulley cover
D ............................................................... Headstock
E ............................................ Chuck and chuck guard
F .................................. Tool post and tool post guard
G ......................................................... Machine lamp
H ........................................................ Coolant nozzle
I .................................................................... Top slide
J ..................................................................... Carriage
K ................................................................... Tailstock
L ............................................................ Splash guard
M ............................................................... Lathe bed
N .............................................................. Lead screw
O .................................................................. Chip tray
P ....................................................................... Apron
Q ......................................................... Anchor points

 

 

 

 

 

 

 

 

 

Figure 5‐2: Machine description
R ........................................... Feed speed select knob
S ........................................ Feed forward/off/reverse
T ...................................................... Coolant ON/OFF
U ............................................ Spindle power ON/OFF
V ......................................... Spindle forward/reverse
W .................................... Variable speed select knob
X .......................................................Emergency Stop
Y .............................................. Spindle speed display
Z ................................................... Apron hand wheel
AA .......................................... Cross slide hand wheel
BB ............................................ Top slide hand wheel
CC ........................................................ Half‐nut lever

 

 

 

 

 

 

 

 

 

 

Figure 5‐3 Machine description
VV ......................................................... Top slide lock
XX ...................................................... Cross slide lock
YY ................................... Top slide taper adjustment
ZZ ........................................................... Carriage lock

 

Figure 8‐1: Spindle speed range setup

Changing spindle speed range
The speeds of the lathe are controlled by the variable speed
select knob (W, Fig 5‐2) as well as the position of the belt on
the pulleys (Fig 8‐1).

A ......... 50~1250 RPM .......... for maximum torque.
B .......... 100~2500 RPM ........ for maximum speed.
Remove the pulley cover (C, Fig 5‐1) to change the belt
position. Reinstall the pulley cover.

Figure 8‐2: Change gear setup

Change gear setup
Remove the pulley cover.
The rotational speed of the lead screw, and hence the rate of
feed of the cutting tool, is determined by the gear
configuration and by the feed speed select lever (R, Fig 5‐2).
Assemble the gears with desired setup (Fig 8‐2)

 

 

Adjust gears to mesh with upper and lower gear.
Placing ordinary paper in between gears helps to adjust for
correct gear spacing (… remove the paper afterwards!).
Reinstall the pulley cover.

 

 

 

 

 

 

 

 

 

Operating Controls
Refer to Figure 9‐1:
R ......................................................... Feed select knob
S ........................................... Feed forward/off/reverse
T .......................................................... Coolant ON/OFF
U .............................................. Spindle power ON/OFF
V ............................................. Spindle forward/reverse
W ....................................... Variable speed select knob
X .......................................................... Emergency Stop
Y .................................................. Spindle speed display

 

 

 

 

 

 

 

 

 

Figure 10‐6: Machine controls
The correct feed depends on the material to be cut, the cutting
operation, the type of tool, the rigidity of the work piece
chucking, the depth of cut and the desired surface quality.

Figure 10‐7: Available feed rates

Turning with auto feed
Move the half‐nut lever (CC, Fig 10‐6) down, to engage the
automatic longitudinal feed. Move it up to disengage
Three feed rates are readily available by rotating the feed
select knob (R, Fig 9‐1).

 

 

 

For example:
Operation feed/rev select knob
Stock removal 0,28mm ................................ III
Finishing cut 0.14mm ................................. II
Micro finishing cut 0.07mm .................................. I
NOTE: Three additional feed rates are available with different
change gear setup (Fig 10‐7).

The correct feed depends on the material to be cut, the cutting
operation, the type of tool, the rigidity of the work piece
chucking, the depth of cut and the desired surface quality.
When roughing big diameters reduce the depth of cut !

Optionales Zubehör / optional accessories:

PBD-2555V_Zubehoer.pdf
PDF-Dokument [2.0 MB]

Bedienungsanleitung / Manual:

Ersatzteilliste / Part List:

PBD-2555V_Manual_EN_07-2017.pdf
PDF-Dokument [4.3 MB]

Sollten Sie weitere Fragen haben, zögern Sie nicht uns zu kontaktieren.

 

Should you have any further questions, please do not hesitate to contact us.

Ihre Formularnachricht wurde erfolgreich versendet.

Sie haben folgende Daten eingegeben:

Kontaktformular

Bitte korrigieren Sie Ihre Eingaben in den folgenden Feldern:
Beim Versenden des Formulars ist ein Fehler aufgetreten. Bitte versuchen Sie es später noch einmal.

Hinweis: Felder, die mit * bezeichnet sind, sind Pflichtfelder.

Hier finden Sie uns

ToolParts-Service

Kleinhaslach 35
90599 Dietenhofen

Kontakt

Technischer Support:

 

Rufen Sie einfach an

0049(0) 98 72 / 95 66 61 0 oder nutzen Sie unser Kontaktformular.

Mitglied im Händlerbund
Landbell AG
Druckversion Druckversion | Sitemap
© ToolParts-Service